CLICK HERE FOR BASEBALL CAP FAST FLAT FRAME VIDEO DEMONSTRATION INCLUDING 3D PUFFY FOAM
Sell your old cap frame and replace with this revolutionary fast baseball cap frame.
No need to attach baseball cap jig to your machine.
Large sewing field 140mm x 160mm.
Frame up in under 1 minute like normal t shirt sweatshirt etc
Only limitation to sewing height is the height of the cap.you can also run on the sides and back of the cap.
As you will know to run baseball caps on a single or multi head embroidery machine, you need to attach the cap jig. Invariably the sewing field is limited to circa 6cm high and you can generally only run at circa 600 stitches per minute.
This flat frame allows you to frame up as you would any t shirt type product. As the cap runs flat you can run the machine at full speed and you can embroider a larger insignia. No need to take the frame off to change the bobbin, access as you would any normal hoop.
On multi head machines you can run caps with other items, ie on a 6 head have 3 caps and 3 shirts running at the same time etc.
The image of the baseball cap in and out of the frame was run at 1000 stitches per min. The insignia is 10,000 stitches, sewing field is 8cm high x 10cm wide.
This was framed up in under 1 min and running time just over 10 mins.
Currently we have laid down stock to fit tajima, toyota, happy, brother and swf machines. If you require frames for alternate machines we can make these as all we need to do is change the arms to fit your machine.
Price listed is per frame, however for multiple orders we can discuss discounts. Generally for single head we would recommend 2 frames per machine, and we can discuss prices for multi head machines.
We will email a start up guide and tips on how to get the maximum performance with every order and we will be uploading a video to youtube
Any questions contact Andrew